Radon when buying or selling a home: tests, timelines and what to ask

Published [object Object] · Updated 2026-11-18 · Sources checked 2026-11-18

The short answer

EPA recommends testing any home you buy or sell. Real-estate tests use one of three short-term options of at least 48 hours, with steps to prevent tampering. If the result averages 4 pCi/L or more, EPA says to fix the home. A high result can be fixed. It doesn't have to end a sale.

What EPA recommends

The three real-estate testing options (EPA)

All tests should run at least 48 hours (EPA):

Option How it works Fix the home if…
Passive, simultaneous Two short-term tests at the same time, in the same spot the average is 4 pCi/L or more
Passive, sequential One short-term test, then a second identical test in the same spot right after the average is 4 pCi/L or more
Active One continuous radon monitor the average is 4 pCi/L or more

EPA notes the trade-off: two tests at once are more precise, while back-to-back tests better reflect the seasonal average.

Preventing tampering

Because a sale is time-sensitive and money is at stake, EPA's guide describes precautions a test provider may use. These include devices that record radon levels often (to spot unusual swings), motion or proximity detectors, recording temperature and barometric pressure, tamper-proof seals on windows, and a non-interference agreement signed by the seller or occupant.

In Pennsylvania these aren't optional for certified testers. Pennsylvania's testing rules, 25 Pa. Code § 240.310, require anti-tampering procedures for real-estate tests. The buyer, seller, occupant or other person in control of the property signs a Conditions for Short-Term Radon Testing Agreement (Pa. Code).

Accepting the seller's earlier test

EPA says a buyer may accept a seller's earlier result. Before you do, find out (EPA):

Seller disclosure in Pennsylvania

Pennsylvania's seller property disclosure statement form, in 49 Pa. Code § 35.335a, asks whether the seller knows of hazardous substances on the property, listing radon by name, and whether the property has been tested for hazardous substances (Pa. Code). Ask your agent or attorney exactly what you need to disclose.

If the result is high

Checklist

Frequently asked questions

How long does a radon test take during a home sale?

EPA's real-estate options all run at least 48 hours: two passive tests side by side, two passive tests back to back, or one continuous monitor.

Can I accept the seller's old radon test?

EPA says you may, but first check who did the test, where in the home it was placed, the results, and whether the home or its HVAC system has changed since. Test the lowest level you might use regularly.

Does a Pennsylvania seller have to disclose radon?

Pennsylvania's seller property disclosure statement in 49 Pa. Code § 35.335a asks whether the seller is aware of hazardous substances, including radon, and whether the property has been tested for hazardous substances. Ask a real-estate professional or attorney about your specific obligations.

Is a high radon result a deal-breaker?

Not necessarily. EPA notes radon problems can be fixed, and even very high levels can be reduced. Buyers and sellers often handle it as part of the sale; get advice from your agent or attorney on contract terms.

Sources

  1. Home Buyer's and Seller's Guide to Radon (EPA 402/K-24/001, revised March 2024), U.S. EPA.
  2. How to Protect Your Family from Radon When Buying a Newly Built Home, U.S. EPA.
  3. 25 Pa. Code § 240.310 — Testing protocols (real estate testing), Pennsylvania Code.
  4. 49 Pa. Code § 35.335a — Seller property disclosure statement, Pennsylvania Code.
  5. Radon and Testing fact sheet (2940-FS-DEP4428), Pennsylvania DEP.

This guide is for general information only. It is not medical, legal, or engineering advice. Read our disclaimer.